The MG Series gooseneck system is equipped with a sophisticated dual preamp circuitry – one circuit located in the capsule housing and the other built into the base of the XLR. This circuitry is internally balanced, ensuring the audio path will be isolated from hum and noise. In addition, this circuitry provides protection from RF interference and spurious emissions from cell phones and wireless GSM devices.
The MG12, MG15, and MG18 are professional miniature gooseneck condenser microphones designed for applications such as podium, presentation, meetings, and teleconferencing. The MG condenser microphones are designed with a uniformly controlled cardioid polar pattern, helping to isolate the speaker from ambient noise. These models are also available in a hypercardioid polar pattern. With a wide frequency range of 60 Hz – 19 kHz, the MG provides natural sound with an exceptional vocal response.
18″ flexible gooseneck podium microphone featuring high output MICROS circuitry. 18 – 52 V phantom power.
Transducer Type Pre-PolarizedCondenser
Frequency Response 60Hz 19 kHz
Polar Pattern Cardioid/ Hypercardioid (MG12HC, MG15HC & MG18HC)
Output Impedance 150Ohms balanced
Sensitivity 38mV (C) / Pa @ 1k 32 mV (HC) / Pa @ 1k
Equivalent Noise Level 22dB (A weighted)
Signal to Noise Ratio 72dB
Maximum SPL 130 dB
Dynamic Range 108 dB
Power Requirements 18 52 Volts phantom
Polarity Positivepressure on diaphragm produces positive voltage on pin 2 relative to pin 3 ofoutput XLR connector
Materials / Finish MachinedBrass / Black Finish
Weight 118 g / 4.16ounces (MG12) 126 g / 4.44 ounces (MG15) 134 g / 4.73 ounces (MG18)
Length 415 mm / 16.3inches (MG12) 480 mm / 18.9 inches (MG15) 570 mm / 22.4 inches (MG18)
1 x MG12, MG15 or MG18 Miniature Gooseneck CondenserMicrophone
1 x TM1218 Flange Table Mount
1 x WS1218 External Windscreen