Tascam 8 IN/ 8 OUT Matrix Mixer w/DSP Processing

Home Tascam Tascam 8 IN/ 8 OUT Matrix Mixer w/DSP Processing
8 IN/ 8 OUT MATRIX MIXER w/DSP PROCESSING
Email A Friend Add To Wishlist
MX-8A
ADK-TCM-1356-00166
Tascam
Availability: In stock
$999.00

8 Input /8 Output Matrix Mixer with DSP

 

MX-8A

Matrix Mixer with built-in DSP for small and mid-scale audio installations

The TASCAM MX-8A is a Matrix Mixer equipped with 8 mic / line inputs and 8 line outputs as well as integrated DSP for audio optimization in various environments and configurations Custom control apps are also available to allow easy setup and adjustment by both system integrators and end users.

Dedicated wall-mount external controller

MX-8A

Source selection, volume adjustment, and mute functions can be remotely changed with the external wall-mount programmable controllers RC-W100-R120 and RC-W100-R86. Both controllers are equipped with one LCD display, an encoder and 4 switches. Up to 8 units of RC-W100-R120 or RC-W100-R86 can be installed with one TASCAM MX-8A.

 

* RC-W100-R120 and RC-W100-R86 are optional accessories, sold separately.

 

* The following updates are required to use "RC-W100".

 

"MX-8A" firmware update to V1.10 or higher

"TASCAM MX CONNECT" software update to V1.2.0 or higher

Structuring small to mid-scale systems

The TASCAM MX-8A is possible to mix mic and playback equipment audio signals into 8 different zones. This function can be used in installation systems for small to medium scale stores, restaurants or banquet rooms, etc.

Powerful Integrated DSP

The onboard DSP provides a full set of audio processing for mic and line inputs including Compressor, 4 parametric EQ, auto level, ducking and more. On line level outputs, the DSP delivers 10 band EQ, high pass filters, low pass filters, delay and limiter effects.

Remote Control Software

Control of the TASCAM MX-8A via either of the two available control software applications

 

- TASCAM MX CONNECT, designed for integrators and providing control over the configuration and settings of an entire system.

Features at a glance

8-channel mic / line input with phantom power (+48v) support

Supports remote mic gain control

8 line output

Equipped with Euroblock connectors for signal input / output

Compatible with external software (Windows / macOS / Android / iOS) for audio playback / recording via USB audio interface function

Includes a variety of DSP functions for optimal use in different scenes / environments

Flexible scene preset function allows recall of a variety of configurations (Up to 50 presets)

Timer event function allows to automatically switch scenes at a specified time (planned to be compatible on a future version update)

2 types of user control software available for Windows / Mac / iOS / Android devices:

TASCAM MX CONNECT (For integrators); Input / output routing selection, DSP / design / scene settings of the complete system, etc.

TASCAM EZ CONNECT (For end-users); Simple app design with only the necessary functions such as area volume settings, etc.

Equipped with a RS-232C connector to support serial remote control systems

Equipped with an RS-485 connector for dedicated wall-mount programmable controller RC-W100-R120 / RC-W100-R86 (optional accessories, sold separately) enabling source selection and volume adjustment.

Supports remote control via Ethernet

1U rack-mountable size

Installed indicators display operating status and control software connection status

Spec description

FORMAT44.1k / 48k Hz, 16bit / 24bit
USB 
Connector4-pin USB B-type
Transfer rateUSB2.0 High Speed (480Mbps)
ANALOG IN 
ConnectorEuroblock (Balanced) 3.81mm pitch
Minimum input level-70dBu
Maximum input level 
MIC+26dBu
LINE+24dBu
Input impedance2.2k or higher
ANALOG OUT 
ConnectorEuroblock (Balanced) 3.81mm pitch
Nominal output level+4dBu (when Ref.Level set to other than -9dBFS)
+6dBu (when Ref.Level set to -9dBFS)
Maximum output level
(switchable)
+15dBu (Ref.Level: -9dBFS)
+18dBu (Ref.Level: -14dBFS)
+20dBu (Ref.Level: -16dBFS)
+22dBu (Ref.Level: -18dBFS)
+24dBu (Ref.Level: -20dBFS)
Output impedance200 or lower
RS-232C 
ConnectorD-sub 9-pin (female, inch-standard)
RS-485 
ConnectorRJ-45
CablesCategory 5e or faster STP cables
ETHERNET 
ConnectorRJ-45
Transmission protocolTCP/IP
Ethernet standard100BASE-TX
CablesCategory 5e or faster STP cables
PowerAC100-240 V, 50/60 Hz
Power consumption21W
Dimensions483(W) 45(H) 304.1(D)mm (including protrusions)
Weight3.0kg
Operating temperature range040C
Included itemsPower cord 1, Euroblock plug 16Cable band kit 1, Rackmount screw kit 1, Owner's Manual (including warranty) 1
Write Your Own Review
You're reviewing:Tascam 8 IN/ 8 OUT Matrix Mixer w/DSP Processing
Your Rating

Related Products