GPI & Tally interface provides 8 contact closure inputs and 8 contact closure outputs for connecting to ATEM switchers and Videohub routers. Tallies will be displayed when connected to an ATEM switcher to indicate their "on-air" status and you can even connect multiple interfaces together to increase the number of inputs and outputs. GPI and Tally Interface also works as a Videohub control panel without buttons and LEDs so you can make your own! Now anyone can connect to Videohub routers to control cross-points!
25 pin D-type connector providing 8 opto isolated inputs and 8 relay contact closure outputs.
1 x USB 2.0 high speed interface for configuration and firmware updates.
Optical isolators triggered by connection to ground. Max 5V at 14mA.
Mechanical relay contact closure to ground. Max 30V at 1A.
10/100 BaseT with loop through for connecting to other ethernet enabled equipment.
Configured via ATEM Switcher Utility.
Firmware built into software driver. Loaded at system startup or via updater software.
0 to 40 C (32 to 104 F)
-20 - 60 degrees celsius
Up to 95%
12 Months Limited Manufacturer's Warranty.
GPI and Tally Interface
Software CD
Power Supply
Mac 10.14 Mojave,
Mac 10.15 Catalina or later.
Windows 8.1 and 10.
12V power supply included with international socket adaptors for all countries.