If you’re project calls for a lot of over the shoulder or handheld shooting, you’ll want to add the Blackmagic URSA Viewfinder. You get a high resolution 1920 x 1080 color display that lets you get incredibly accurate focus and the screen is so sharp that it’s impossible to see any individual pixels so it’s just like using an optical viewfinder on a traditional film camera. The viewfinder can be adjusted for either left or right eye use. Simply plug it into the power and SDI viewfinder output, then start shooting! The viewfinder features a sensor that turns off the screen when you’re not using it to save power and extend the life of the OLED screen.
1 x 3G-SDI BNC.
1 x 4 pin XLR 12V.
USB 2.0 Mini-B port for software updates.
Full 1920 x 1080.
Up to 60fps
6.22 Million Pixels
24 bit RGB, 16.7 million colors
4 Element diopter.
-4 to +3
Buttons for settings, short cut features and navigating menus.
Built in overlay display processor and top mounted buttons.
Can be tilted vertically and extended for left or right eye use.
LED tally light.
Camera mount with adjustment.
Detects camera information embedded in the SDI signal from URSA, URSA Mini and Blackmagic 3G-SDI Shield for Arduino.
0 to 40 C (32 to 104 F)
-20 to 60 C (-4 to 140 F)
0% to 90% non-condensing
Blackmagic URSA Mini Shoulder kit is required for mounting URSA Viewfinder on URSA Mini or URSA Mini Pro.
12 Month Limited Manufacturers Warranty.
Blackmagic URSA Viewfinder
3/8 inch viewfinder mounting thumb screw for URSA
Mac 10.14 Mojave,
Mac 10.15 Catalina or later.
Windows 8.1 and 10.
12V power input via 4 pin XLR connected via 12v power output.