The ADX40 is a miniaturized condenser microphone designed to hang from an overhead position for applications such as group vocals, choir, theatrical production, and room ambiance.
Having a uniformly controlled cardioid polar pattern, the ADX40 helps isolate the area or section being miked from other vocals or instruments on stage. The ADX40 is also available in a hypercardioid polar pattern for tighter pick-up control. With a wide frequency range of 40 Hz – 20 kHz, the ADX40 provides natural sound with an exceptional sound response.
The ADX40 miniature hanging condenser microphone is supplied with an attached 30′ shielded cable, external windscreen, wire hanger for positioning, and phantom power adapter. 9 -52 V phantom required.
Frequency Response 40Hz 20 kHz
Polar Pattern CardioidHypercardioid (ADX40HC)
Output Impedance 250ohms balanced
Sensitivity 5mV / Pa @ 1k
Equivalent Noise Level 29dB (A weighted)
Signal to Noise Ratio 65dB
Maximum SPL 130 dB
Power Requirements 9 52 Volts phantom
Cable/Connector Shielded30 terminating to a miniature 3 pin Female XLR connector
Polarity Positivepressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Materials / Finish Brass/ Black E-Coat
Weight 110 g / 4 oz
Length 30 mm / 1.2 in
1 x ADX40 Miniature Overhead Condenser Microphone
1 x APS910 Cylindrical Preamplifier
1 x HANGER40 Wire Hanger
1 x P1 Carrying Pouch
1 x 30 Attached Shielded Cable
1 x WS10 External Windscreen