Convert with style:
Maximum quality. Most affordable.
The PULSE16 converts 16 x 16 studio-grade balanced analog inputs and outputs up to 96kHz to ADAT I/O. As a cost-effective and mature interface, ADAT is already available almost everywhere – so expanding your studio with the PULSE16 by 16 x 16 analog channels is done in a few steps.
The Low Latency Cirrus Logic converters, accompanied with a temperature-compensated clock and jitter reduction PLL, guarantees best crystal clear sound. All this packed in a compact 1HU, the PULSE16 delivers studio levels of up to +20dBu, individually adjustable in 1dB steps, brought to 32 TRS connectors. Thanks to the 4 x 4 ADAT interfaces, 16 x 16 channels can still be converted without any problems even at 96kHz.
Configuring the device is a breeze thanks to the two TFT screens. No need to consult the manual, every information is displayed clearly on the screens. Remote control via MIDI and MADI is also possible.
The headphone can be connected to any analog or digital input or output: ideal for control or monitoring.
If your studio grows, the PULSE16 grows with it: MADI I/O can be added via a MADI-SFP module together with an upgrade of the firmware. The PULSE16 then becomes a full-fledged PULSE16 MX.
Upgrade your studio: the best you can connect your ADAT lightpipes to.
Internal Routing Matrix
All 48 x 48 analog and digital channels of the Pulse16 are brought together in groups of 8 using the internal routing matrix. For easy monitoring, any channel, mono or stereo, can be selected for headphone output.
Dual TFT Display
Keep track of all 32 analog channels at any time: Everything is shows clearly on two TFT screens. Status information and all functions are presented clearly and intuitively, so no need to consult the manual anymore. Gone are the days of blinking LED‘s and incomprehensible operation!
Optional MADI Upgrade
The PULSE16 has a SFP port which can be used to upgrade to MADI. By adding the SFP module and upgrading the firmware, the unit turns into a fully equipped Pulse16 MX, including 192kHz operation.
16 x 16 BALANCED TRS
balanced analog I/O, max 96kHz (192kHz with MADI option)
Gain/Levels: -8dBu…+20dBu (1dB steps)
4 x 4 ADAT TOSLINK
Each ADAT port transfers eight channels at a sample rate of 48kHz (= 32 In + 32 Out).
PHONES STEREO TRS (FRONT)
Monitoring of every stereo/mono I/O via an additional stereo DAC.
Word Clock I/O
BNC with 75 Ohm internal termination.
On/Off via display.
For Remote Control and MIDI-over-MADI
(with installed MADI module).
Optional MADI module.
For Multimode or Singlemode MADI SFP
with optical LC connector.
MADI I/O (AES10)
PULSE 16 MX (Multimode included)
PULSe 16 optional via SFP
SFP port for MADI optical Multimode or Singlemode SFP module
64 channels@32kHz, 44.1kHz, 48kHz
32 channels@64kHz, 88.2kHz, 96kHz
16 channels @128kHz, 176.4kHz, 192kHz
Support of MIDI over MADI.
Latency: 2 samples
Analog Inputs (AD)
2 x CS5368 (Cirrus Logic)
16 x TRS (6.3mm), female
Analog switches: +20dBu, +13dBu, +4dBu
Digital gain: +20dBu -8dBu, 1dB steps
@48kHz: 12/fs, 0.25ms
@96kHz: 9/fs, 0.09ms
@192kHz: 5/fs, 0.03ms
TFT screen, 28 levels
Analog Outputs (DA)
2 x CS4385 (Cirrus Logic)
16 x TRS (6.3mm), female
Digital gain: +20dBu -8 dBu, 1dB steps
@48kHz: 7.8/fs, 0.16ms
@96kHz: 5.4/fs, 0.06ms
@192kHz: 6.6/fs, 0.03ms
1 x (6.3mm) TRS jack, stereo.
Selectable mono or stereo source.
Digitally controlled volume level.
4+4 optical ports (8 channels each with 48 kHz)
16 channels@32kHz, 44.1kHz, 48kHz
16 channels@64kHz, 88.2kHz, 96kHz
8 channels @128kHz, 176.4kHz, 192kHz (SMUX4 only withinstalled MADI MX option)
Latency: 2 samples
2 x DIN5 connector for remote control of the unit
Conversion MIDI <> MIDI over MADI possible (MADI MXoption required.)
BNC: 1 x input, 1 x output
75 Ohm Termination switchable for input
1 x input jack with screw lock.
Power required: 12VA in operation, 0,1VA in standby mode(Efficiency Level VI)
Internal resettable polyfuse
1 x power supply included
SMUX4 with 192 kHz operation (requires installed MADIoption).
Delay-compensation for MADI chain (requires installed MADIoption).
MIDI over MADI Preset Management (requires installed MADIoption)
TCXO (temp. compensated oscillator) with high accuracy.
Initial accuracy: +/-1.5ppm
Over temperature range: +/-2.5ppm
Digitally controlled PLL / Jitter reduction system
Output jitter: 50ps 100ps typ.
2 x TFT Color Screens for the complete control of all analogI/O levels and all settings of the unit
One Key Control provides an easy control of all functions.
Multi language help pages guides available (No need to studythe manual.)
Depth: 19cm (7.5) (including connectors)
2 kg (4.4lbs)
41F up to 113F (+5C up to +45C)