Where Sound Becomes Music
Epure v3 is a state-of-the-art five-band equalizer designed to provide the absolute finest audio quality within the domain of digital audio processing, carefully tuned to preserve the optimal signal to noise ratio independent of the parameter settings. A sharp-edged surgical precision tool created to meet the demands of the professional audio industry.
Five EQ bands with hands on editing of the band curves on the display
Filter types, on each band; low cut, low shelving, peak, hi shelving, hi cut
Frequency range covering the whole bandwidth
Q factor adjustable (from 1.00 to 100.00
Gain control (ranged -24 dB to +24 dB)
True Bypass routing the incoming signal direct to the output
Multiply gain (x2) affecting the gain value of the band-section
Divide gain (/2) affecting the gain value of the band-section.
Invert, converting the band-section positive values to negative and vice versa.
Master gain control
Audio I/O routing matrix
Up to 4 MS encoders / decoders
Up to 8 band groups
Preset and Parameter Handling
To enhance the workflow the two Preset/Parameter slots, A and B, can be loaded with two full set of parameters at the same time. Apart from saving each preset, a “Global Preset” containing both the A and B settings, and the position of the “Morphing Slider”, can be saved.
Instant and precise operation
The logical and comprehensive user interface contains instant shortcut functions to enhance and simplify the user workflow.
Each of the five color coded band sections is covering the complete frequency range and offers -/+ 24 dB gain with dynamic instant gain controls allowing you to:
– Multiply the gain by 2 (x2) affecting the gain value of the band-section.
– Divide the gain by 2 (/2) affecting the gain value of the band-section.
– Invert the gain with just the flip of a switch, converting the band-section positive values to negative and vice versa.
Multichannel, M/S and routable processing groups
Eight channels of simultaneous processing for L-R, M-S or surround operations with 4 MS decoders/encoders and up to 8 internally routable processing groups to process multiple explicit tiers from within one single plug-in instance.
Using the internal processing groups and the MS option in a multichannel setup, you could have one set of controls grouped together for the front channels, with a different group controlling the rear channels, configuring an MS EQ on the front channels and simultaneously another MS EQ on the rear channels as well, using one single instance of Epure v3 only.
Dual Preset Slots and Parameter Morphing
The built in preset manager and the preset morphing slider, provides instant and intuitive control of all parameters and controls. In a second, with a simple one-click operation, everything is copied from one of the two preset slots to the other, even during playback.
The two Preset/Parameter slots, A and B, can be loaded with two full set of parameters at the same time, and except for only A/B comparing two sets of parameters, the morphing slider will allow to mix them, and to record the morph with the host automation
Windows 7 SP1, 8.1 and 10, all in 64 bits only.
Mac OS X (Intel) All versions from 10.11 (64bit only)
A graphic card fully supporting OpenGL 2.0 is required. USBdisplays are not supported.
Windows: If your computer has an ATi or NVidia graphicscard, please assure the latest graphic drivers from the ATi or NVidia websiteare installed.
Mac OS X: OpenGL 2.0 required Mac Pro 1.1 & Mac Pro2.1 are not supported.
Software license requirements
In order to use the software, an iLok.com user account isrequired (the iLok USB Smart Key is not required).