Focusrite Pro RedNet A16R MkII

Home Focusrite Focusrite Pro RedNet A16R MkII
16x16 Analogue I/O With Independent Level Control
Email A Friend Add To Wishlist
FRT-REDNETA16RMKII
Focusrite
Mac & Win
Usually ships in 1-2 business days.
Availability: In stock
As low as $3,239.99

RedNet A16R MkII is a 16-channel analogue Interface for Dante networks, with two channels ofAES3 I/O. Individual input and output channel level controls allow for precise adjustment of all I/O levels using RedNet Control. With two power supplies and primary and secondary ether CON network connectors, RedNet A16R MkII is perfect for critical-path applications in recording, post-production, live sound and broadcast. Built-in redundancy features allow for silent fail-over in the event of power or network outage, providing reassurance for system technicians.


Analogue inputs and outputs are connected through four rear-panel AES59-configured DB25connectors, while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. The XLR input can accept DARS signals in addition to AES3. Word Clock I/O on BNC connectors allows external devices to clock to RedNet A16R MkII, or alternatively allows RedNet A16R MkII to act as a network clock grand master, synchronized to external input. RedNetA16R MkII is well suited to permanent installation and repeated strike and setup: all connectors lock and remain terminated even under stress, providing worry-free installation and peace of mind once situated in a rack. In addition, all Focusrite Pro products come with a three-year warranty and award-winning customer support.


16 channels of high-quality line-level analogue I/O for Dante Audio-over-IP networks

Individual input/output channel level control and calibration available in +/- 1db increments via digital trim fader with mute and dim functions

24-bit precision conversion up to 192kHz

119dB dynamic range, flat from 20Hz – 20kHz, +/-0.15dB

Software-selectable +24dBu or +18dBu level alignment

AES67, AES70 and SMPTE 2110 compliant

Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability

Word Clock I/O and DARS input for increased flexibility plus an additional two channels of AES3 I/O

Analogue I/O to AES59 standard DB25 connectors

Comprehensive front-panel metering and indicators

RedNet Control remote monitoring software with powerful graphic user interface

LINE INPUTS

0 DBFS Reference Levels

 

+18 or 24dBu (switchable) (will this need to be restated due tovariable level control

 

Frequency Response

 

20Hz 20kHz 0.1dB

 

THD+N

 

Less than -100dB (0.001) unweighted, 20Hz 20kHz; -1dBFS input

 

EIN

 

-96dBu A-Weighted (typical)

 

Signal-To-Noise Ratio

 

120dB A-Weighted (typical)

 

Converter Dynamic Range

 

120dB A-Weighted (typical), 10Hz 20kHz

 

LINE OUTPUTS

0 DBFS Reference Levels Outputs

 

18 or 24dBu (switchable)

 

Frequency Response Outputs

 

20Hz 20kHz 0.1dB

 

THD+N Outputs

 

Less than -100dB (0.001) unweighted, 20Hz 20kHz; 23dBu input

 

Noise In Presence Of Signal

 

-94dBu A-Weighted (typical)

 

Dynamic Range

 

118 dB A-Weighted (typical)

 

Converter Dynamic Range Output

 

120dB A-Weighted (typical), 10Hz 20kHz

 

CROSSTALK

Input To Output Or Input

 

Less than -100dB unweighted, 20Hz 20kHz; 23dBu input

 

Output To Input Or Output

 

Less than -100dB unweighted, 20Hz 20kHz; -1dBFS input

 

DIGITAL INPUT SAMPLE RATE CONVERTERS

Sample Rate Range

 

32kHz to 216kHz

 

Gain Error

 

-0.3dB

 

Dynamic Range Inputs

 

Greater than 138dB

 

THD+N Inputs

 

Less than -130dB (0.00003)

 

Latency

 

11 to 45 samples (network and sample rate dependent)

 

DIGITAL PERFORMANCE

Supported Sample Rates

 

44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24bit

 

Clock Sources

 

Internal or from Dante Network Master

 

External Word Clock Range

 

Nominal sample rate 7.5

 

REAR PANEL CONNECTIVITY

Line Inputs

 

2 x DB25 connectors

 

Line Outputs

 

2 x DB25 connectors

 

Channel Count

 

2 x 2 AES/EBU channels

 

Input (Optional DARS)

 

1 x Female XLR (Switchable with analogue input channels 15 and 16 atquad rates)

 

Output

 

1 x Male XLR (Duplicate of analogue output channels 15 and 16 at quadrates)

 

Word Clock Input

 

1 x BNC 75O port (switchable termination)

 

Word Clock Output

 

1 x BNC 75O port

 

PSU

 

2 x IEC Inputs with retaining clips

 

Network

 

2 x EtherCON NE8FBH, also compatible with standard RJ45 connectors

 

FRONT PANEL INDICATORS

Primary PSU (A)

 

Green LED. Illuminates when an AC input is applied and all DC outputsare present

 

Primary Network

 

Green LED. Indicates that a network connection is present on primaryport when in redundant mode

 

Secondary Network

 

Green LED. Indicates that a network connection is present on secondaryport when in redundant mode

 

Network Locked

 

Green LED. When unit is following network grand master, shows validnetwork lock

 

Sample Rate

 

Orange LED for each: 44.1kHz, 48kHz, x2, x4

 

Pull Up/Down

 

Orange LED. Indicates that the unit is set to operate on a Dante pullup/down domain

 

AES/EBU Signal Indicators

 

2 I/O signal indicator LEDs

 

Clock Source

 

Orange LED for each

 

NETWORK MODES

Redundant

 

Allows unit to connect to two independent networks

 

Switched

 

Connects both ports to integrated network switch allowingdaisy-chaining

Write Your Own Review
You're reviewing:Focusrite Pro RedNet A16R MkII
Your Rating

Related Products