Focusrite Pro RedNet R1

Home Focusrite Focusrite Pro RedNet R1
RedNet R1 is a desktop remote controller that unleashes the power of Focusrite Red interfaces. It’s designed for professionals who need to adapt their audio configurations quickly to suit the ever-increasing demands of the studio environment.
Email A Friend Add To Wishlist
FRT-REDNETR1
Focusrite
Mac & Win
Usually ships in 1-2 business days.
Availability: In stock
As low as $899.99

RedNet R1 enables users to interact with their audio system like never before. It provides the flexibility to control a range of different monitor output setups, ranging from mono through to7.1.4 surround, including Dolby Atmos® and other immersive audio workflows. Alternatively, completely custom setups of up to 12 outputs can be configured for bespoke speaker configurations. RedNet R1 can be used to control groups of outputs from a Red interface’s multitude of sources and destinations, including from Pro Tools | HD and other DAWs, analogue inputs and outputs, ADAT and S/PDIF connections, and from entire Dante audio ecosystems, simultaneously and interchangeably.


RedNet R1 supports a maximum of eight input sources from 32 available audio channels, across analogue, digital, DAW and Dante connections, and mixes and routes signals to up to 12 monitor output channels. Top-panel control includes level, reference level preset selection, cut, dim, mute and a variety of solo modes. There’s an A/B switch for switching between numerous monitoring presets, and up to four fold-down presets allow fast switching for checking downmixes. Custom cue mixes can be sent to talent from any of the 32 available inputs.


RedNet R1 also features a Dante-enabled talkback section, internal mic-pre and a high-powered headphones output, so you can interact with your Dante system like never before. Up to four talkback destination groups are available when used with a Red interface. (When used with other Dante devices, a single talkback group is available.) RedNet R1 has an internal microphone, or users can connect their own microphone via the rear-panel XLR. The high-fidelity headphone output is powerful enough to deliver high-SPL audio to high-impedance headphones.


RedNet R1 features two LCD displays for highly accurate level metering of the outputs, sources and headphone outputs, and for giving visual cues for navigating around menus. The unit is configured using RedNet Control2, the software manager designed primarily for ease of use in quickly setting up both simple and complex monitoring and routing configurations. Other features of the RedNet R1 include a quarter-inch jack socket, which accepts a footswitch for talkback management, LFE muting and more. It can be powered via Ethernet to reduce cabling complexity(using the PoE standard), or by a DC power supply.

INTERNAL TALKBACK

Note

 

All measurements taken at maximum gain unless otherwise stated, Rs =150

 

Gain Range

 

0dB to 55dB

 

Type

 

Electronically Balanced, Zin = 3k

 

Max. Input Level

 

+10dBu 0.5dB

 

EXTERNAL TALKBACK

Note

 

All measurements taken at maximum gain unless otherwise stated, Rs =150

 

Gain Range

 

0dB to 55dB

 

Max. Input Level

 

+10dBu 0.5dB

 

Frequency Response

 

20Hz - 20kHz 2dB

 

THD + N

 

Less than -98dB (0.0012%) @ -1dBFS

 

EIN

 

Less than -128dBu 'A'-Weighted (typical)

 

Signal-To-Noise Ratio

 

-111dB 'A'-Weighted (typical), min gain

 

Common-Mode Rejection Ratio

 

50/60Hz CMRR: <-77dB

 

Type

 

Electronically Balanced, Zin = 3k

 

HEADPHONE OUTPUT

Note

 

All measurements taken at +19dBm reference level, maximum gain, RL =600

 

0 DBFS Reference Levels

 

+11dBm

 

Frequency Response

 

20Hz to 20kHz 0.5dB

 

THD + N

 

-100dB (0.001%) @ -1dBFS, Rs = 150R

 

Dynamic Range

 

108dB 'A'-weighted (typical), 20Hz - 20kHz

 

Noise In Presence Of Signal (NiPoS)

 

Greater than -97 dBu 'A-Weighted'

 

Output Impedance

 

5

 

Headphone Impedance

 

32 - 600

 

MICROPHONE/ LINE CROSSTALK

Mic Input To Headphone Output

 

Less than -122dB; 20Hz - 20kHz (all other channels at 0dBFS)

 

Headphone Output To Mic Input

 

Less than -84dB; 20Hz - 20kHz (all other channels at 0dBFS)

 

HEADPHONE CROSSTALK

Left To Right

 

Less than -85dB; 20Hz - 20kHz (all other channels at 0dBFS)

 

Right To Left

 

Less than -85dB; 20Hz - 20kHz (all other channels at 0dBFS)

 

DIGITAL PERFORMANCE

Supported Sample Rates

 

44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit

 

Clock Sources

 

Internal or from Dante Network Master

 

REAR PANEL CONNECTIVITY, POTS & SWITCHES

External Talkback Mic Input

 

1 x XLR (F)

 

Foot Switch

 

1 x 1/4" stereo jack

 

OUTPUTS

Headphone Outputs

 

1 x 1/4" stereo jack

 

POTS & SWITCHES

Power Switch

 

1 x Switch

 

Talkback Gain Pot

 

1 x Pot

 

Talkback Switch

 

1 x Tri-State Switch (External Talkback + 48V, External Talkback andInternal Talkback)

 

INPUTS

PSU & NETWORK CONNECTIONS

PSU (PoE And DC)

 

1 x PoE Input and 1 x DC 12V Locking Barrel Input Connector

 

Network

 

1 x Standard RJ45 connector

 

TOP PANEL INDICATORS

LCD Screens

 

2 x Screens (Control, Status, Metering & Menus)

 

Control Functions

 

2 x Continuous Pot (Level & Dim). 1 x Pot (Headphone Output). 24 xMulti-Function Switches (Sources, Talkback, Monitor Outputs & Menu Items).12 x Single-Function Switches (Headphones, Sum, Spill, Mode, Mute, Solo,Outputs, A/B, Cut x 2, Dim & Output Lock)

 

POWER

Power Over Ethernet (PoE)

 

Complies with IEEE 802.3af class 0 Power-over-Ethernet standard (PoE Aor PoE B compatible)

 

DC Power Supply

 

1 x 12V 1.2A DC Power Supply

 

Power Consumption

 

PoE: 10.3W - DC: 9W (When using supplied DC PSU)

 

HEAT PERFORMANCE

Operating Temperature

 

Operates at up to an ambient temperature of 40 degrees Celsius

Write Your Own Review
You're reviewing:Focusrite Pro RedNet R1
Your Rating

Related Products