N3 3G-SDI-NDI Converter

Kiloview N3 3G-SDI/Full NDI® Encoder/Decoder 

Kiloview N3 for NDI® supports up to 1080P60 video input (Encoder) or 1080P60 video output (Decoder). A tally system with a big tally light is built-in for indicating which camera is in program or preview. It also has the 3.5mm. It is small and compact enough to put in your pocket with the overall size of 100*80*24mm. It featured with an 3G-SDI input and 3G-SDI loop for view on the monitor while NDI streaming, or 3G-SDI output while decoding. audio input/output. Kiloivew N3 for 3G-SDI has a wide DC input range from 5V to 18V, so it can be easily powered by USB, power bank or camera battery. It can also be powered over Ethernet (PoE). A threaded screw camera mount is provided for your mounting on a camera. PTZ control is available by USB to Serial adaptor. 

Application

·        IP production for UHD video program

·        Project video to the wall at low-latency

·        Video transmission at low-latency

·        Others

Product Highlights

·        1 x SDI input, 1 x SDI loop-through or decoding output;

SDI video input/output with embedded audio.

·        Wide DC power input range from 5V-18V to make it easy

powered by USB, power bank, etc.

·        3.5mm audio Input/output and Intercom supported.

（Kiloview Software required）

Compatible with Kiloview IMS software for device and source management.

 Optional control cable supported which can control PTZ over Visca / Visca over IP / Pelco etc..

 (Customize available for other unlisted PTZ protocols)